Firstly, sleep mode settings may cause an Insignia Fire TV to shut off unexpectedly. This can be fixed by disabling sleep mode. Another typical cause can be power cable issues. Removing the cord from the wall outlet for a few hours and properly reconnecting it usually fixes them. Additionally, it can be your remote control that’s malfunctioning. Just simply reset it. Other than that, if upgrades cause your TV to boot loop, a manual update might fix it. Finally, a main board component failure may require a simple repair.
- 1 Key Takeaways
- 2 5 Reasons Why Insignia Fire TV Turns Off By Itself [Solved!]
- 2.1 Reason 1: Sleep mode settings
- 2.2 Reason 2: Power cord issues
- 2.3 Reason 3: Remote control malfunction
- 2.4 Reason 4: Update-caused boot loop
- 2.5 Reason 5: Component failure on the main board
- 3 Frequently Asked Questions (FAQs):
- 4 End Note
- Sleep mode settings, power cord issues, remote control malfunction, update-caused boot loop or Component failure on the main board can cause the Insignia Fire TV to turn off by itself.
- Each of these problems has easy step-by-step solutions to fix them.
5 Reasons Why Insignia Fire TV Turns Off By Itself [Solved!]
In this section, we will take a sneak peek at the potential culprits that are causing this problem.
|Sleep mode settings
|Turn off sleep mode completely
|Power cord issues
|Unplug the power cord from the wall outlet for a few hours
|Remote control malfunction
|Reset the remote control
|Update-caused boot loop
|Manually Update for Insignia Fire TV Stuck in Boot Loop
|Component failure on the main board
|Perform a factory reset
Not finding the Amazon Prime channels, while an inconvenience, can often take a back seat when dealing with this perplexing issue. So, let’s take a deep dive into these reasons and learn how to fix them easily!
Reason 1: Sleep mode settings
The Insignia Fire TV occasionally powers down independently due to sleep mode settings. When enabled, the TV automatically enters sleep mode after a period of inactivity.
Solution: Turn off sleep mode completely
Here’s a step-by-step guide to turning off sleep mode for an Insignia Fire TV using ADB:
Step 1: Ensure your Insignia Fire TV is powered on and connected to the same Wi-Fi network as your computer.
Step 2: On your Insignia Fire TV, navigate to “Settings” in the main menu.
Step 3: Scroll down and select “Device & Software.”
Step 4: Choose “Developer Options.”
Step 5: Toggle “ADB Debugging” to ON. Now, enable developer mode by repeatedly clicking on “My Fire TV” or a similar option in the “About” section if it’s hidden.
Step 6: Make a note of your Insignia Fire TV’s IP address. You can find this information in “Device & Software -> About -> Network.”
Step 7: Now, you can use ADB (Android Debug Bridge) via a terminal program or a tool like adbLink to disable sleep mode. Follow your chosen tool’s specific instructions to connect to your Insignia Fire TV using its IP address and then disable sleep mode.
Remember to be cautious when using developer options, and if needed, you can turn off ADB Debugging when you’re finished to maintain security.
Reason 2: Power cord issues
The Insignia Fire TV may turn off by itself if there is a problem with the power cord. It could be a loose link, damage to the cord, or a problem with the plug. These problems mess up the power source to the TV, causing it to turn off without any warning.
Solution: Unplug the power cord from the wall outlet for a few hours
To fix power line problems, disconnect the TV’s power cord from the wall source and leave it unplugged for a few hours. This step helps you to release any remaining energy. After this time, safely plug the TV cord into the switch and try to turn on the TV.
At the same time, make sure that the power cord is tightly and properly linked to a working AC outlet. Check for any weak connections or decay on the cord itself. To make sure the port works, try putting in something else, like a lamp or phone charger.
If the TV was previously hooked to a power strip or surge protector, unplug it from these devices and plug it straight into the wall outlet. This step gets rid of any power source problems that could arise because of these devices.
Reason 3: Remote control malfunction
The remote control is often the reason why an Insignia TV turns on or off by itself. If the remote control isn’t working right, it could be sending messages to the TV without you knowing. Toshiba Fire TV gets stuck on searching for remote for similar reasons.
Solution: Reset The Remote Control
Here are some tips for resetting the Insignia Fire TV remote:
- Take off the plate covering the batteries on the remote control and take out both batteries.
- Find the power button on the remote, which might be at the top left or right, and hold it down for 20 seconds.
- Press very hard on every single button on the remote. This will help if a button won’t move or if there is something stuck under it.
- Put both batteries back in the remote and try to use it again.
- If the first trick didn’t work, turn off your TV and unplug it from the wall.
- Depending on what kind of TV you have, the power button may be on the back or under the TV. If you find a button, hold it down for 30 seconds.
- Wait exactly one minute. If your TV doesn’t have a button, you can safely plug it back in after waiting one minute.
Reason 4: Update-caused boot loop
If an update fails on a Fire TV, it will keep restarting until a manual update is done. This constant loop can make it hard to use the TV normally, and can get very annoying.
Solution: Manually Update for Insignia Fire TV Stuck in Boot Loop
If your Insignia Fire TV is stuck in a boot loop, it could be because of a problem with the software. You can try to fix this problem by doing a manual update by following these steps:
- Check Your Internet Connection: Make sure your Insignia Fire TV is connected to the internet, either through WiFi or an Ethernet wire. For the update process to work, you need a stable link.
- Reach TV Settings: To reach the TV settings, use your remote control. Most remotes have a “Cog” or “Settings” button that you can press to do this.
- Go to the “My Fire TV” page: Scroll down in the settings menu and choose “My Fire TV” or a similar choice, based on the type of TV you have.
- Go to “About” Section: To get to the “About” menu, look for “About” in the “My Fire TV” menu and click on it. This menu gives you information about your TV, like how its software is doing right now.
- Check for Updates: Find “Check for Updates” in the “About” page and click on it. Then, your TV will check to see if there are any changes.
- Check Update state: Once you’ve started the update check, you’ll get a message telling you the state of the update. There are two things that could happen:
- If the warning says, “Your Fire TV is up to date,” then your TV is using the latest software, and the update is not the cause of the boot loop.
- If there is an update, follow the instructions on the screen to download and install it. This could take some time..
- Turn on Your TV: After the update has been made properly, your TV may ask you to turn it back on. Follow the steps on the screen to do this
Reason 5: Component failure on the main board
A broken part on the main board is a typical explanation for why your Insignia Fire TV might turn off by itself. This internal problem can cause some parts to overheat, which can cause the computer to act strangely and shut down often.
Solution: Perform a factory reset
Check for problems by turning on your TV and waiting for it to turn off by itself. Move your hand around the back panel to find hot spots, which could be a sign that the phone is burning.
- Prepare for Back Panel Removal: Unplug your TV, wait 30 minutes, and lay it face down on a clean surface. Ground yourself so you don’t get a shock.
- Remove the Back Panel: To get to the parts inside, unscrew the back panel and pull it away from the front.
- Find the Problem Part: Based on what you saw earlier, look for the part that is burning.
- Replace the Faulty Part: If you can, use a soldering gun to replace the chip that is giving you trouble. If not, you might want to replace the whole board, which you can usually find online for $30 to $50.
- Cooling Methods: Use a small fan or make a hole and point a fan toward the area that is too hot. Less heat can also be produced by turning down the brightness of the lighting.
- Optional Capacitor Inspection: Check the power and main boards for broken capacitors and, if necessary, repair them with a soldering gun and cheap parts.
By following these, you can easily stop this issue for recurring again. It’s even easier than jailbreaking a Smart TV!
Frequently Asked Questions (FAQs):
What are the remote codes for Insignia?
There are more than 200 different universal key codes that can be used to pair with an Insignia TV. Here is a list of codes:
Bose: 10171, 11204, 11326, 11517, 11641, 12002, 11564
General Electric: 1406, 1407, 1408, 1181, 1180, 1175, 0456, 0029, 0905, 1171, 0103, 0189, 0217, 0135, 0133, 0116, 0167, 1148
InnovAge: 000, 001, 004, 009, 035, 038, 045
One for All: 0054, 1204
Do all Insignia remotes work on all Insignia TVs?
Yes, they do. A universal remote can also be used to control your Insignia TV, compatible with most newer models. Menu keys are typically used for controlling the TV. Test the remote after batteries are installed and use codes for easy setup on multiple devices.
Who makes Insignia TV?
Best Buy sells Insignia TVs under their own name, with contracts with Chinese company Hisense. These affordable TVs offer picture quality at a lower price. They offer smart, LCD, LED, and plasma TVs. Best Buy operates globally with stores in Canada and Mexico.
That’s all we have for you today. Hopefully, now you understand why insignia fire tv turns off by itself and how to solve it.
We will be back with more informative write ups. Till then, goodbye!